ByrdPilot Dock Scan
ByrdPilot

Dock Scan

Reads the machine you are on, checks it against the specs of 80+ docks, and names the fault. Nothing is installed and nothing leaves your browser.

01

Your machine

Reading your hardware…

Not right, or can’t be read? Set it yourself

Mac: Apple menu → About This Mac → Chip. Refresh rate: macOS System Settings → Displays, Windows Settings → System → Display → Advanced display.

02

Which dock?

Not sure which dock you own? Look for the model number on the underside of the dock.

03

Your setup

Which laptop port is the dock plugged into?

How is the problem screen connected to the dock?

04

What’s it doing?

Advanced: read firmware version and link speed too

The browser can’t see your dock’s firmware revision, the negotiated Thunderbolt link speed, or the wattage it’s actually delivering. If you want those checked as well, run one command and paste what it prints. It only reads — it changes nothing.

How this works: the readings and the fault are computed from your hardware and our specifications for 80+ docks, not guessed. Mac display limits come from Apple’s published specs. Failure rates are directional field data, not manufacturer return rates. Display detection uses the browser’s screen-management API where it exists; where it doesn’t, the tool asks.